English 
العربية 
日本語 
한국어 
Tiếng Việt 
ไทย 
Bahasa Melayu 
فارسی 
Bahasa Indonesia 
ဗမာစာ 
简体中文 
香港中文 
繁體中文 
Русский 
Deutsch 
Nederlands 
Italiano 
Français 
Español 
Português 
Afrikaans 
Azərbaycan dili 
Български 
ਪੰਜਾਬੀ 
हिन्दी 
اردو 
বাংলা 
Հայերեն 
Íslenska 
Қазақ тілі 
नेपाली 
Српски језик 
Kiswahili 
తెలుగు 
Basa Jawa 
தமிழ் 
मराठी 
Sheet Metal 600W Portable Power Station
The sheet metal 600W portable power station is a durable and compact 600W solar generator designed for outdoor electricity, emergency backup and mobile power applications. Equipped with a BYD LiFePO4 blade battery and pure sine wave inverter, it delivers safe and stable power for sensitive electronics and daily appliances. The rugged metal housing improves heat dissipation and impact resistance, making this portable power station 600W ideal for camping, RV travel, job sites and disaster preparedness kits.
Get an up-to-date quote with additional free information to download!
Compact 600W Solar Generator for Reliable Power Anywhere
With 655Wh battery capacity and 600W rated output, this solar generator 600W can support most small and medium electronic devices including laptops, routers, lighting, cameras and portable refrigerators. Unlike fuel generators, the 600W portable solar generator operates silently and emission-free, suitable for both indoor and outdoor environments. The pure sine wave inverter protects computers, communication devices and medical equipment from electrical interference.
Durable Sheet Metal Design & Long-Life LiFePO4 Battery
The high-strength sheet metal shell provides better structural stability, high temperature resistance and outdoor reliability compared with plastic enclosures. The BYD LiFePO4 battery offers over 4000 cycles with higher thermal stability and improved safety over standard lithium batteries. The integrated battery management system continuously monitors operation and provides overcurrent protection, over-discharge protection, low power protection, high and low temperature protection, overload protection, short circuit protection and automatic disconnection protection.
Multi-Interface Output for 99.99% Devices
This 600W portable power station supports multiple devices simultaneously with flexible charging ports including Type-C fast charging, USB ports and DC output for routers and cameras. The AC outlets provide universal compatibility and support global plug standards such as US, EU, UK and AU, making it suitable for international travel and distribution markets.
Fast Charging & Solar Generator Capability
The unit supports rapid AC charging up to 450W and can be fully recharged in about 1.7 hours under proper conditions. It is also compatible with portable solar panels, allowing renewable energy charging during camping and outages. This makes it a reliable portable solar generator 600W solution for off-grid use.
Application Scenarios
This portable power station 600W is widely used for emergency backup power to keep communication devices and lighting running during outages, outdoor and RV electricity supply for camping and van life, and mobile worksite energy for tools and field operations.
Parameters
| Name | Portable Power Station |
| Rated Power | 600W |
| Capacity | 655Wh / 204800mAh |
| Battery Type | BYD LiFePO4 Battery |
| Material | Sheet Metal |
| Lifespan | 4000+ |
| Waveform | Pure Sine Wave |
| USB Switching Time | 10ms |
| Type-C Output × 2 | C1:18W,C2:40W |
| USB Output × 2 | A1:15W,A2:18W |
| DC Output | 12V Max 60W |
| AC Output × 2 | 22V Max 600W |
| AC Input | 450W Max |
| Waterproof Grade | Product:IP21,Silicone cap:IP54 |
| LED Light | 3W |
| Operating Temperature | -10℃ ~ 60℃ |
| Storage Temperature | -20℃ ~ 60℃ |
| Charging Time | 1.7H |
| Weight | 6.3Kg |
| Dimensions (L×W×H) | 320×215×185mm |
| Standard Accessories | 1 × Charger, 1 × User manual |
| Certificates |  |
Certificate
About us
A decade of energy storage manufacturing excellence.
Residential Solar Energy Storage Battery Solution Manufacturer
TURSAN is a high-tech enterprise integrating R&D, manufacturing, and global sales of lithium battery–based energy storage systems. Founded in 2016, we operate a 20,000+m² production facility producing reliable LiFePO4 power solutions for residential, commercial, and outdoor applications.
Through a strategic partnership with BYD, we co-manufacture larger-capacity, safer, and more environmentally friendly portable power stations and home battery backups. Today we serve global brand owners, distributors, EPC contractors, and project developers in over 60 countries — saving OEM clients up to 20% in annual sourcing cost while meeting the toughest international safety standards.
OEM&ODM Process
Confirm Requirements and Finalise the Solution
We collect all customer specifications: voltage, capacity, dimensions, communication protocol, etc. Then we decide if it is a pure OEM job (build exactly to your drawings) or an ODM job (we provide the design). We issue a clear BOM (bill of materials) and 2D/3D drawings for both parties to sign off, avoiding any later misunderstandings.
Procurement and Incoming Inspection
We purchase all materials according to the BOM: cells, enclosure, brackets, screws, wiring, BMS boards, etc. When goods arrive, we do sampling or 100% inspection. For cells, we measure voltage, internal resistance and check appearance. For structural parts, we check dimensions and hole sizes. Any non‑conforming items are rejected and never go into our warehouse.
Cell Sorting and Matching
We group cells from the same batch by voltage and internal resistance values. We then match cells with the closest parameters into one set (for example, if a string uses 4 cells, the voltage and resistance differences among those 4 must stay within our set limits). This directly affects how long the battery pack will last without performance decay.
Laser Welding and Module Assembly
We fix cells into holders, then laser‑weld the tabs (connectors). We do pull‑force tests on sample weld spots to check strength. After that, we fasten the welded sub‑modules into the enclosure or tray, using torque‑controlled tools to apply the correct tightening force.
BMS Installation and Wiring Connection
We mount the main BMS and slave boards in their designated positions, then plug in all voltage sampling wires and temperature sensors. We always have a two‑person verification of the wiring sequence – this prevents reverse connections that could burn the boards when we power up.
First High‑Voltage Safety Test
We apply high voltage between the positive/negative terminals and the enclosure to measure insulation resistance and withstand voltage. We check for any leakage or breakdown. If this test fails, the module goes back for rework immediately – it does not move forward.
High‑Temperature Standing and Self‑Discharge (K‑Value) Check
We place the modules in a 45 °C room for 24–48 hours. We measure voltage before and after the standing period, then calculate the daily voltage drop (K‑value). Units with excessive drop are rejected because they indicate internal micro‑shorts that could cause early failure later.
Charge/Discharge Aging and Capacity Calibration
We connect the modules to charge/discharge equipment and run several full cycles at the current specified by the customer. During the process, we record actual discharge capacity, charge/discharge efficiency, and the temperature/voltage differences among individual cells. If all data stay within our acceptance limits, we calibrate the final rated capacity. If not, we isolate and analyse the failed units.
Final Inspection, Labelling and Packaging
We re‑measure total voltage, internal resistance and insulation performance. We check appearance for scratches, gaps, or damaged screws. We attach a permanent nameplate (with serial number), UN38.3 hazardous‑goods label, and all required operation warning labels. Then we package the battery with foam or cardboard for shock protection, as per customer requirements, and record the final weight.
Shipment and Document Handover
We verify the shipping quantity, address and consignee. We prepare all accompanying documents: factory test report, MSDS, UN38.3 test summary, and transport condition certificate. We arrange pickup with our logistics partner, and after dispatch we send the tracking number and estimated arrival time to the customer.
Quality Control
FAQ
Q1: What can a 600 watt solar generator run?
A 600W solar generator can power laptops, routers, LED lights, CPAP machines, cameras, TVs and small portable refrigerators within the rated load. It is intended for daily electronics rather than heating appliances.
Q2: How long does a 600W generator last?
Runtime depends on the load. A 100W device can run roughly six hours while a 300W load may operate about two hours considering conversion efficiency.
Q3: Can a 600W generator run a fridge?
It can run energy-efficient mini fridges but full-size refrigerators often exceed startup power requirements.
Q4: What appliances run on 600W?
Computers, fans, projectors, lighting, communication equipment and small appliances under 600W.
Q5: Is a solar generator big enough to run a house?
A 600W unit can operate essential devices but cannot power a full household continuously.
Q6: What are the disadvantages of a solar generator?
Limited output power and dependence on sunlight for recharging, but it offers silent and maintenance-free operation.
Q7: What should you not plug into an inverter?
High-power heating devices such as kettles, heaters and hair dryers should not be connected.
Q8: Are solar generators worth buying?
Yes, they provide clean portable energy, reduce fuel cost and improve emergency preparedness.
Q9: How many amps is 600W?
Approximately 2.7A at 220V AC or around 50A at 12V DC.
Q10: How many solar panels are needed?
Around 200–300W solar panels are recommended to recharge this capacity efficiently depending on sunlight conditions.
Related Products
Partner with TURSAN, Ignite a New Chapter in Your Country's Energy Storage Business
As a professional manufacturer of solar lithium battery energy storage systems, TURSAN is dedicated to providing the global market with high-quality home energy storage batteries, inverters, portable power stations, and all-in-one storage solutions. We now sincerely invite you to become our exclusive partner in your country or region, to jointly develop the clean energy storage market and create steadily growing business value.
Exclusive Regional Authorization
After signing the agreement, we will cease wholesale distribution to other clients in your region, fully safeguarding your market interests.
Priority Order Processing & Shipping
Ensure you can respond to local demand immediately and capture time‑sensitive market opportunities.
Product Customization Support
From your first order, we can design and produce energy storage systems completely tailored to your brand.
Comprehensive Product Range Suppor
From home storage and portable power to inverters and all-in-one units with built-in inverters — meeting diverse application needs.
Proven Success in 30+ Countries
We have already helped partners worldwide achieve measurable brand growth and increased profitability.
Your Most Reliable Backend
Whether you are a systems integrator, electrical distributor, or building your own brand, you get stable products and flexible cooperation mechanisms.
📩 Contact us now to receive a customized partnership proposal and product information.
Let’s join hands to bring reliable power solutions to homes and businesses, and co-create a green energy future together!
