RV & Van Life Power Systems

Reliable

Off-Grid Power

for RVs, Vans, and Specialized Vehicles.

OEM/ODM Power Kits: Compact, Vibration-Resistant, and Easy to Install. The best portable power station for RV builders, van conversion franchises, and mobile fleet operators — shipped factory-direct.

0
+
Units / Fleet Order
- 0
%
Space Saving vs Lead-Acid
12/24/48V
Voltage Compatible
OEM/ODM
White-Label Ready
UL / CE / UN38.3

Transport Certified

Vibration Tested

Road-Grade Certified

Plug & Play

70% Less Wiring

–20°C Cold Start

Self-Heating Option

OEM / ODM

Private Label Ready

B2B Pain Point Solutions

We Solve the Three Biggest RV Conversion Headaches

Every van conversion shop and RV fleet manager faces the same three obstacles. Here’s how TURSAN eliminates them before they cost you a sale.

Pain Point

“We can’t fit the battery in the build. Space is our biggest constraint in every van conversion.”

Solution

Ultra-Compact Design

TURSAN LiFePO4 batteries save 50% of the space vs equivalent lead-acid, increasing cargo capacity and enabling cleaner, more profitable builds.

Pain Point

“Road vibrations kill our battery connections within months. Warranty replacements are destroying our margins.”

Solution

Automotive-Grade Structural Integrity

Reinforced enclosures and internal cell securing pass road-simulation vibration tests. Each unit survives 10–500Hz, 3G peak acceleration on 3 axes.

Pain Point

“Wiring takes our technicians half a day per build. Complex wiring = expensive callbacks and unhappy customers.”

Solution

All-in-One Integration

Pre-wired all-in-one systems with built-in MPPT + inverter + BMS reduce on-site wiring by 70%, cutting labor cost and install time dramatically.

Space Saved vs Lead-Acid
0 %
Vibration Resistance
0 G
Less Wiring Workload
0 %
Mobile Power Matrix

Choose the Right Power Kit for Your Build

Four product categories engineered for different RV and van conversion profiles. All available with OEM/ODM private labeling.

Stackable Batteries

5 kW/5 kWh Stacked Battery

Can be stacked up to a maximum of 25 kW/25 kWh

Voltage

48V

PV(MPPT)

800W~5600W

Power

5kW × 1

Capacity

5kWh × 1

Maximum Stack

5 (25kW/25kWh)

Cycle Life

6,000+

5kW solar inverter with battery | All in one Home Battery Backup
Best Seller
Compact All-in-One Printer for Home Use

3kW 5kWh All in One ESS

Ultra-slim & supports wall mounting and portability

Voltage

48V

PV(MPPT)

1000-2500W

Power

3kW

Capacity

5kWh

Output Waveform

Pure Sine Wave

IP Rating

IP54

Mid-size all-in-one printer for home use

5kW All-in-One ESS

Inverter + battery integrated · 1-day deployment

Voltage

48V

PV(MPPT)

2500-4000W

Power

5kW

Capacity

5kWh

Switch Time

<10 ms

ATS

Built-in

Level 1

12V100Ah LiFePO4 Battery

Batteries for small mobile devices

Voltage

12V

Capacity

100Ah

Communication

Bluetooth

Shell Material

PC+ABS

Cycle Life

6,000+

Weight

9.94Kg

Level 2

12V200Ah LiFePO4 Battery

Camping Trailer Battery

Voltage

12V

Capacity

200Ah

Communication

Bluetooth

Shell Material

PC+ABS

Cycle Life

6,000+

Weight

19.49Kg

Level 3

12V300Ah LiFePO4 Battery

Batteries for RVs and Vans

Voltage

12V

Capacity

300Ah

Communication

Bluetooth

Shell Material

PC+ABS

Cycle Life

6,000+

Weight

29.25Kg

24V100Ah Solar Battery
Compact Wall Power

24V 100Ah LiFePO₄ Battery

Ultra-slim design fits tight RV compartments with ease

Voltage

25.6V

Capacity

100Ah

Communication

Bluetooth

Warranty

5 Year

Cycle Life

6,000+

Weight

26.4Kg

24V200Ah Solar Battery
Balanced Energy Hub

24V 200Ah LiFePO₄ Battery

The sweet spot for medium-sized van conversions

Voltage

25.6V

Capacity

200Ah

Communication

Bluetooth

Warranty

5 Year

Cycle Life

6,000+

Weight

44.05Kg

24V300Ah Solar Battery
Max Capacity 24V

24V 300Ah LiFePO₄ Battery

Maximize 24V system range without adding extra units

Voltage

25.6V

Capacity

300Ah

Communication

Bluetooth

Warranty

5 Year

Cycle Life

6,000+

Weight

62.5Kg

48V100Ah Solar Battery
Entry 48V Power

48V 100Ah LiFePO₄ Battery

Step into higher efficiency with a space-saving footprint

Voltage

51.2V

Capacity

100Ah

Communication

Bluetooth

Warranty

5 Year

Cycle Life

6,000+

Weight

43.9Kg

48V200Ah Solar Battery
Parallel-Ready Core

48V 200Ah LiFePO₄ Battery

Easily stack in parallel for growing power demands

Voltage

51.2V

Capacity

200Ah

Communication

Bluetooth

Warranty

5 Year

Cycle Life

6,000+

Weight

89.34Kg

48V300Ah Solar Battery
High-Density Storage

48V 300Ah LiFePO₄ Battery

One unit delivers all-day off-grid energy for larger rigs

Voltage

51.2V

Capacity

300Ah

Communication

Bluetooth

Warranty

5 Year

Cycle Life

6,000+

Weight

113Kg

1000W
Karaoke-Ready Power

1200W Portable Power Station

Built-in radio, speaker, and microphone input — sing anywhere outdoors

Rated Power

1200W

Capacity

1310Wh

PV(MPPT)

150W

Waveform

Pure Sine Wave

Charging Time

1.5H

Cycle Life

4000+

2400W Portable Power Station
Best Seller
Rugged Overland Power

2400W Portable Power Station

Roll cage design with dust & water resistance for tough environments

Rated Power

2400W

Capacity

2621Wh

PV(MPPT)

1800W

Waveform

Pure Sine Wave

Charging Time

2.5H

Cycle Life

4000+

3600W Portable Power Station with Sheet Metal Housing
Rolling Station

3600W Portable Power Station

Telescopic handle and wheels for suitcase-style portability

Rated Power

3600W

Capacity

3921Wh

PV(MPPT)

1500W

Waveform

Pure Sine Wave

Charging Time

3H ~ 4H

Cycle Life

4000+

Technical Comparison

Mobile Power Specs That Matter to B2B Buyers

The exact parameters your procurement team needs to match the right product to your vehicle type and customer base.

Spec

All-in-One (3kW / 5kW)

LiFePO4 Battery Series

Portable Power Station

Form Factor

Large battery on wheels

Plug and play

Standard car battery / Wall-mounted / Freestanding

Suitable for a variety of scenarios

Compact Portable

fits standard RV cabinetaAlternative Options for Fuel-Powered Generators

Voltage Options

24V / 48V

12V / 24V / 48V

AC 110V / 230V Output

Charging Sources

Solar + Alternator + Shore

Solar / Alternator / DC-DC

Solar / AC / Car Outlet

Communication

Bluetooth / CAN / RS485

Victron, SMA compatible

Bluetooth / CAN / RS485

Victron, SMA compatible

LCD Display + App

Vibration Rating

IEC 60068-2-6 (3G / 3-axis)

Road-grade reinforced

Shock-absorb case

Low Temp Operation

–20°C (self-heat opt.)

–20°C (self-heat opt.)

–20°C (self-heat opt.)

IP Rating

IP54 standard

IP54 standard

IP54 standard

Surge Capability

2× Rated (motor-start)

Per inverter spec

2× rated (short burst)

OEM/ODM Label

Full white-label ready

Full white-label ready

Full white-label ready

Min. Order (MOQ)

50 units

50 units

100 units

Application Scenarios

Every Mobile Living Profile, Powered

From the minimalist digital nomad to the full-time luxury RV family — TURSAN has a power kit precision-matched to each build type.

2400W RV Battery

The "Digital Nomad" Van

Lightweight van builds where space is money. A 2400W portable power station for RV use paired with foldable solar panels delivers complete off-grid independence with zero permanent installation.

2400W Station
Foldable 400W Solar
Zero-Install
Moves Between Vehicles
10kWh RV Solar Battery

The "Full-Timer" Luxury RV

Large motorhomes and coaches running AC units, induction cooktops, and home appliances. The 5kW All-in-One paired with a 51.2V 200Ah stack handles the full-timer lifestyle without compromise.

5kW All-in-One
51.2V 200Ah Stack
AC Compatible
Generator Auto-Start
Ambulance emergency battery

Specialized Vehicles

Ambulances, mobile coffee vans, and emergency command vehicles demand high-rate discharge and reliable surge power for medical equipment, espresso machines, and communication systems.

High-Rate Discharge
2× Surge Power
Dual Voltage Output
Rapid Recharge
Real-World Case Studies

Fleet-Proven in the Field

Real conversions, real deployments — documented results from B2B buyers who chose TURSAN as their OEM power partner.

12V Car Battery
Europe · Van Conversion Fleet

Europe's Leading Van Conversion Fleet: 500+ Units of 12V 200Ah Systems

A German van conversion franchise with 12 workshops across Europe standardized on TURSAN 12V 200Ah LiFePO4 as their fleet-wide battery spec. After 18 months and 500+ installations, warranty callback rate dropped from 8.3% (lead-acid) to under 0.4% — dramatically improving their service margins and customer satisfaction scores.

500+

Units Deployed

0.4%

Warranty Rate

12

Workshops Served

USA · Off-Road Adventure Trailer

Off-Road Adventure Trailer: Seamless Power in Extreme Terrains

An American off-road trailer manufacturer required a battery system that could survive Class 4 trail impacts, fording, and desert heat cycles. TURSAN supplied vibration-tested 12V 100Ah packs with reinforced cell mounts and IP65 enclosures. After 2 seasons of testing across the Mojave and Rocky Mountain trails, zero structural or cell failures were reported.

3G

Vibration Passed

47°C

Peak Desert Temp

0

Cell Failures

R&D & Mobile Power Engineering

Built for Roads, Not Rooftops

Every TURSAN mobile power product goes through a dedicated road-simulation vibration test protocol before it ships. Our test rigs replicate the IEC 60068-2-6 standard — 10–500Hz frequency sweep, 3G peak acceleration on all 3 axes — because a product designed for a static rooftop installation will fail on a corrugated outback track or a European cobblestone street.

Our proprietary BMS firmware includes alternator charging optimization — a critical feature for mobile applications. Unlike standard BMS configurations, our logic prevents overcharge damage from vehicle alternators and includes low-voltage isolation to protect the vehicle’s starter battery during deep discharge scenarios.

3-Axis Vibration Lab
Alternator BMS Optimized
–20°C Cold Start Verified
IP54 Ingress Tested
ISO 9001 Certified Factory
CATL / EVE / BYD Cells
Certifications & Standards
BYD

LiFePO4 Battery

UN 38.3

Transport Safety

IEC 62133

Cell Safety

CE / FCC

Market Compliance

ISO 9001

Manufacturing QMS

RoHS

Hazardous Sub. Free

Automated Production Line for Solar Battery Pack
Quality Control

Tested for the Road, Not the Lab

Our QC protocols go beyond standard certifications — every test is designed to replicate the real-world abuse a mobile power system will face on the road.

01

Road Vibration Test

3-axis vibration testing at 10–500Hz with 3G peak acceleration, simulating rough road, off-road trails, and corrugated tracks per IEC 60068-2-6.

IEC 60068-2-6
02

Salt Spray Test

500-hour 5% NaCl continuous salt spray exposure per ISO 9227. Critical for coastal RV owners and marine/boat applications. C5 anti-corrosion rated enclosures available.

ISO 9227 · C5
03

Cold Start Test (–20°C)

Verified cold-weather startup at –20°C with optional self-heating module. Essential for winter camping, alpine RV parks, and northern Europe van life routes.

IEC 62619
04

Drop & Shock Impact Test

1.5m free-fall drop testing across 6 faces and 4 edges. Confirms that both internal cell structure and enclosure integrity survive typical installation handling and in-vehicle impact events.

IEC 60068-2-27
FAQ

RV & Van Power — Questions Answered

Still have questions?

Our mobile power engineers respond to technical inquiries within 4 business hours. Get answers specific to your vehicle type and conversion spec.

Does it work with existing smart RV control systems like Victron and Simarine?

Yes. TURSAN’s LiFePO4 battery series communicates via RS485, CAN Bus, and Bluetooth. This makes them compatible with Victron Cerbo GX, Simarine PICO monitors, and all major RV energy management platforms. Our All-in-One inverters also integrate with Victron’s VE.Bus protocol for full system visibility. Please confirm your inverter brand at order stage so we can pre-configure the BMS communication parameters.

Yes. All TURSAN batteries hold UN3480 and UN3481 certification. We prepare complete DGR documentation, MSDS/SDS sheets in the required language, and coordinate with IATA-certified freight forwarders for air freight and sea freight shipments to Europe, the USA, Australia, and beyond. Batteries are also available shipped at <30% SOC to comply with air freight restrictions.

Full OEM/ODM white-label service is a core TURSAN capability. We offer: custom enclosure colors, laser-etched or silk-printed logos, branded LCD interfaces, custom user manuals and datasheets, and private-label retail packaging. All from a single minimum order. Typical OEM sample lead time is 7–10 days; production run 25–35 days. Contact us with your brand guidelines to start.

Yes — this is exactly what our 2400W and 3600W portable power stations for RV are designed for. Plug your RV shore power cable directly into the station’s AC output and it will power all 12V and 120/240V systems simultaneously. It’s the ideal solution for digital nomad vans, rental fleets, or build clients who want a zero-installation power upgrade they can move between vehicles.

For van life, the best solar generator is one that combines MPPT charge control, inverter, and LiFePO4 battery in a single compact unit. TURSAN’s 3kW All-in-One fits inside a standard van cabinet, accepts solar input from rooftop panels, charges from the alternator while driving, and powers all AC appliances. For the lightest and most flexible option, our 2400W portable power station for van life can be placed anywhere and moved between vans.

Yes, with the right sizing. A typical RV rooftop AC unit draws 1,200–1,500W running and has a 3,000–4,500W startup surge. Our 3600W Pro Station (7,200W surge) comfortably starts and runs a 13,500 BTU AC unit. Runtime at full AC load: approximately 1.5–2 hours on a single 3.6kWh charge. With a 600W solar array charging during the day, you can maintain comfortable temperatures for extended periods.

12V: Simplest, cheapest, compatible with all existing 12V van accessories. Best for small builds under 100Ah. 24V: The sweet spot for van life. 50% less current = thinner wiring, less heat, longer runs. TURSAN’s 24V 100/200Ah are the most popular RV portable power station replacement. 48V: Maximum efficiency for large RVs and coaches. Required for 5kW+ inverters. Ideal for full-timer builds running air conditioning. We recommend 24V for most van builds and 48V/51.2V for luxury RV and coach builds.

Alternator charging is the soul of the mobile power system — it recharges your battery while driving. TURSAN’s BMS firmware is optimized for alternator charging: it accepts B2B (Battery-to-Battery) or DC-DC charger input, limits charge current to protect your vehicle’s alternator (adjustable 20–80A), and includes low-voltage isolation to prevent the house battery from depleting the vehicle’s starter battery. Our All-in-One units have this built-in; standalone batteries require an external DC-DC charger.

Get Your Mobile Power Quote

Let's Power Your Next Build Together.

Get a scalable mobile power quote from TURSAN’s application engineers. Whether you’re speccing a 10-unit pilot or a 500-unit fleet order — we’ll match the right power kit to your build profile.

Your information is secure. We respond within 24 hours. No spam, ever.

Make Contact Now

Speak to Our Experts in 1 min
Got a Question? Contact me directly and l will help you quickly and directly.
Speak to Our Experts in 1 min
Got a Question? Contact me directly and l will help you quickly and directly.
WeChat Video
Use WeChat to Swipe and Watch our Videos!

Make Contact Now

Speak Directly with Our Boss!
Got a Question? Contact me directly and l will help you quickly and directly.
Speak Directly with Our Boss!
Got a Question? Contact me directly and l will help you quickly and directly.

Make Contact Now

Speak to Our Experts in 1 min
Got a Question? Contact me directly and l will help you quickly and directly.
TURSAN Smart Manufacturing
Witness how our batteries are made — from cells to finished packs — with complete quality control and rigorous testing. Submit your request and our tour coordinator will reach out.